Be Prepared - Our Preparation Methods
Preparation is the key to a longer lasting professional finish
We pride ourselves on our unwavering commitment to applying the necessary and correct preparation procedures to all painting work we commence.
We ensure any surface we paint is thoroughly cleaned of all dirt, grease, mould, surface chalk, flaking paint & any other foreign objects that can potentially affect the final result.
Quite often there are minor defects with these surfaces - cracks, holes, dents & chips. These defects are rectified prior to any paintwork commencing using appropriate products designed for the particular defect. Common products include, but are not limited to: builder’s bog, putty, plaster & Sikaflex.
In addition to the above preparation methods, from time to time, more vigorous procedures have to be used so that the end result is what you, the client, is after. We have specialised teams in place when these services are required. See the below items for these specialised procedures.
High Pressure Water Blasting
An ideal method of removing chalky residue, dirt or mould, leaving a clean substrate suitable for painting providing existing coatings are not lifting or broken down to a point where surface tension would occur.
Sanding
This method is used only where a vacuum sander or other methods cannot be used. This type requires a great deal of preparation to limit the ground and air contamination around the area.
Vacuum Sanding
An effective way of removing existing coatings whilst ensuring minimal occurence of airbourne contamination. Suitable for lead removal in certain circumstances.
Chemical Stripping
An enviromentally friendly option of removing lead paint, however applications are limited. Suitable mainly for large wall surfaces. Airbourne contamination is eliminated.